Bambu Scraper - base for hanging

I redesigned the original base of the model so that it could be attached to the waste container of the Bambulab A1 printer, but also to other printer models that use a waste container when cleaning the nozzle during filament replacement. Of course, the base can be attached to anything with a wall thickness of 2 mm.  The existing base has been reduced in size, which saves on the material needed for printing. I believe that this base for the print box will find wide application. The spatula itself has been modified to remove the original font, and a logo has been added to the other side of the spatula, which is visible when the spatula is inserted into the base.
Thanks to my modification, you will always have the spatula at hand and in its place.

There are two versions of the base in the print profile, which differ in the length of the hanging hook. Before printing, select one of the versions and remove the other from the print profile.

These bases are also suitable for the waste container on the H2D, H2S and I assume also on the H2C. The type of waste container I used for these models can be found in the product photos.