Nerdqaxeplus Solominer Case
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
If you like my designs, I would appreciate a boost.
❤️ Support
If you like this project and would like to support my work, you can do so via the following ways:
• 💸 PayPal donation
• ⚡️ Bitcoin Lightning: atomicgazelle09@walletofsatoshi.com
Thank you for your support 🙏
____________________________________________________
❤️ Support
If you like this project and would like to support my work, you can do so via the following ways:
• 💸 PayPal donation
• ⚡️ Bitcoin Lightning: atomicgazelle09@walletofsatoshi.com
Thank you for your support 🙏
Boost Me (for free)
If you enjoy this model, please boost me
Here is the link to the new V2 Stand for the NQ+/NQ++. A shallower angle provides more stable support for heavier heatsinks, and the completely open rear ensures improved airflow to the back of the NQ+/NQ++
An elegant enclosure for a Nerdqaxe+ Solominer. It accommodates a 40mm or 60mm fan for cooling the circuit board's reverse side. Lateral space within the enclosure allows for neat cable management. Heat-set threaded inserts secure the fans and circuit board; six Ruthex RX-M3x5.7 and eight RX-M3Sx4.0 inserts are needed.
The accompanying stand for the enclosure:
https://makerworld.com/en/models/922373#profileId-884699
All my 3D models are offered with a commercial license – feel free to integrate them into your projects or products and sell them.
If you appreciate my work and wish to support me, a small donation would be greatly appreciated – entirely optional, of course:
💸 PayPal: paypal.me/skaletor87
⚡ Lightning Donation: atomicgazelle09@walletofsatoshi.com
Thank you for your support – any contribution assists me in continuing to develop creative projects and generate new models!
______________________________________________________________________________________________________________________________________________________
A nice case for a Nerdqaxe+ Solominer. It is possible to mount a 40mm or a 60mm fan in the housing, which cools the back of the board. There is also space on the side of the housing to neatly store all the fan cables. In order to attach the fans and the circuit board, threads are melted into the housing. 6x Ruthex RX-M3x5.7 and 8x RX-M3Sx4.0 are required.
The stand for this Case:
https://makerworld.com/en/models/922373#profileId-884699
License
Comment & Rating (6)