Adapter for fixing IKEA Skadis to Raskog - Free 3D Print Model

Search models, users, collections, and posts

a.oka

Tools>Organizers

IP Report

Print Profile(1)

All

A1 mini

H2S

P2S

H2D

H2C

X1E

H2D Pro

P1P

P1S

X1 Carbon

X2D

A2L

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

Designer

1.3 h

1 plate

4.8(37)

Open in Bambu Studio

Boost

174

727

441

298

Released

Description

This is an adapter to fix IKEA Skadis to Raskog.

This model was created based on MR-IT's model and Erle09's model.

MR-IT's model required two different length screws (M3x30, M3x45) and insert nuts (M3).
Erle09's model had a problem with the durability of the hook part.
The model I created solves the problems of these two models.
My model requires only one type of screw (M3x30) and uses a regular M3 nut that is readily available instead of an insert nut. It is also durable because the threaded penetration is made in the area where the load is applied.

Components required for this model are as follows
- 6 M3x30 screws
- 6 M3 nuts

This 3D model is published under a license called "standard digital file license", and any form of sale is not permitted.

Comment & Rating (50)

@liuhaier

Thanks, it's very practical and inspired me, I'm starting from scratch to make a more material-efficient and robust one for the cart, this way I feel shorter screws can be used, because M3*30 screws are generally too hard to find, and this method is still a bit difficult for one person to install: https://makerworld.com/en/models/2021134-best-ikea-raskog-skadis-cart-pegboard-adapter#profileId-2178207

The designer has replied

Show original

@a_oka

I’m a Voron user, so I had an M3×30 on hand, but most people don’t have screws in such a specific length. I thought the idea of sliding the nut in was excellent. Thank you for the lovely remix!

@BoWa1976

Print Profile

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

danke

@user_1424034097

Boosted

Print Profile

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

The profile uploader has replied

@a_oka

Looks good! Thanks!

@notoriousDRP

Print Profile

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

Strength Issue:wall thickness is too small, becomes really thin

The profile uploader has replied

@a_oka

Thank you for teaching me. Due to the chamfering effect of the CAD model, the wall thickness appears to be thin during the printing of the first layer. After printing, the wall thickness should be sufficient for use. I would appreciate it if you could let me know if there are any problems. Thank you

Show original

@philip.stilling

Print Profile

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

Great print I printed with PETG and had no issues thank you creator

Show original

@Mirco_3112

Print Profile

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

Other Issues:Unfortunately, the distance between the holes is not quite right. I had to leave out the rear Part so that it would fit reasonably well.

The profile uploader has replied

@a_oka

Thanks for the feedback. The thickness of the bars may vary depending on the country where they are sold or when they were purchased. I added a step file and an f3z file. Please change the size according to your environment.

(Edited)

@fasur1987

Boosted

for me screws are to short

The designer has replied

@a_oka

Thanks for the feedback! Try tightening the screw while pushing in the M3 nut, the M3 nut is in a slightly deeper position. I have added a picture. By design, it should be possible to fasten with a 30mm screw.

(Edited)

@user_720651361

Prints great fit perfectly and looks great Thanks 👍

Show original

@Jaclyn_2409

Print Profile

For All Printer | 0.2mm layer, 3 walls, 30% infill, Cubic

Worked perfectly! Holds up great on the car

Show original

@RhoenerAllerley

Boosted

Fits perfectly, the narrow part could have been a little thicker. I broke it while tightening the M3 screws. Still great and the best solution for this.

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

IKEA Skadis

AU3D

82.7 k

18.7 k

Ikea Skadis Hooks

Marc Elbichon

24.8 k

6.3 k

IKEA Skadis Tilt Drawer

eethansshen

26.3 k

12.2 k

IKEA SKADIS TOOL HOLDER

Gr3dstampaidee

32.4 k

10 k