Ikea Skadis to Raskog Adapter - optimized v2 - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

MR-IT

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1E

X1 Carbon

H2D

H2C

H2S

H2D Pro

P2S

X2D

A2L

A1 mini

0.2mm layer, 4 walls, 15% infill

Designer

1.5 h

1 plate

4.9(30)

v2 0.6mm nozzle, 0.3mm layer, 4 walls, 15% infill

Designer

1.2 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

219

1015

394

247

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Threaded Brass Heat-Insert Nut

M3 Socket Head Cap Machine Screws (SHCS)

Description

I found this adapter very useful and more robust than other adapters … printing in PLA should be fine, but could also think about PTG HF

M3 inserts were used here with M3 screws - I simplified the model in v2 so that you can use 3x 3x30mm screws instead of a mix

Comment & Rating (42)

@Ingridbugeja23

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

goood print thanks

@user_12283057

Print Profile

0.2mm layer, 4 walls, 15% infill

Impeccable

Show original

@BMO_the_Console

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

Printed Perfectly out of PETG. Assembly is easy, but a second Person holding the Skadis is recommended. I did only used the middle Screw, because my M3x30mm are a little to short.I would recommend M3x35mm, but is seems sturdy enough with just the middle Screw (M3x45mm). Will Update if it falls of.

@liuhaier

Thank you, it's very useful and inspired me. I started from scratch to make a more material-efficient and sturdy version for the cart. This way I feel shorter screws can be used because M3*30 screws are usually too hard to find, and this method is still a bit difficult for one person to install: https://makerworld.com/zh/models/2021134-best-ikea-raskog-skadis-cart-pegboard-adapter#profileId-2178207