Search models, users, collections, and posts
Haslab Ghost trap lens replacement/modification
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
24 min
1 plate
Open in Bambu Studio
Boost
44
96
15
12
85
46
Released
Description
Hello Ghostbusters!!!
This Model is a replacement/Modification for the lens of the Hasbro-Haslab 2 in 1: Ghost Trap.
STEPS (Shown Visually in the Pictures):
1: Remove the four Hex screws.
2: Take the cover off, and the stock lens.
3: Click the 3d printed lens into the cover.
4: Put it back together.
5: Enjoy your now modded trap.
.3mf Users
It's Best if you print this in white or clear fillament
For the Non .3mf users
You will have to align both models and stop and a specific layer height to change fillaments.
No supports needed!!!
That's is all, please enjoy this model!!!
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (15)