is there any way to print this in less than 21 hours?

Texas benchy

fowLakatah

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

user_943502485

Jurek

too much support, difficult to remove it without destroying the model

This Rad Life

really cool model, however some parts are waaaaay to thin and flimsy and printed but broke the second the model was moved. still like having it on my shelf. 

KyleKatarn7

cover

20241216_185407.jpg

20241216_075246.jpg

plate_1.png

plate_2.png

2024-12-27_82a8d82cfe0e9.jpg

This print profile is not for the faint of heart - it is a 21h 30m print.There should be a preset within the 3mf for the octane model shown, but if not, here are the important parts:0.2mm nozzle0.08mm high quality settingEnable SupportOn Build Plate OnlySupport Critical Regions OnlyRemove small overhangs&nbsp;The profile is currently setup for PETG as the original request was to put this model near a computer and I wanted to avoid any potential heat issues, but PLA should work fine.

Rocket League Octane HD (For SLA Printers)

A remix of <a target="_blank" href="https://www.thingiverse.com/pixartist" rel="nofollow noopener">pixartist</a>&#39;s model found here: <a target="_blank" href="https://www.thingiverse.com/thing:4135824." rel="nofollow noopener">https://www.thingiverse.com/thing:4135824</a>.  Their model was originally only compatible with SLA printers, so now it&#39;s been scaled, halved, pegged, rotated, doubled, and mirrored in order to make it FDM-printer compatible.

Print Profile(1)

Description

Comment & Rating (6)

This remix is based on

License

Related Models

Rocket League Octane HD (For FDM Printers)