WDXN

cover

IMG_1115.JPEG

IMG_1116.JPEG

IMG_1117.JPEG

IMG_1118.JPEG

IMG_1119.JPEG

IMG_1120.JPEG

IMG_1121.JPEG

Rocket League Fennec - NO AMS

IMG_1345.JPEG

IMG_1488.JPEG

IMG_1508.JPEG

IMG_1512.JPEG

IMG_1514.JPEG

Glow Glasses

IMG_1139.JPEG

IMG_1137.JPEG

IMG_1138.JPEG

IMG_1140.JPEG

Truss Cable Management Clips

IMG_1984.JPEG

IMG_1985.JPEG

IMG_1987.JPEG

IMG_1975.JPEG

IMG_2003.JPEG

IMG_1997.JPEG

IMG_2012.JPEG

IMG_2024.JPG

IMG_2027.JPG

Rotating Dominus.gif

Dominus timelapse.gif

Rocket League Dominus - HIGH DEF

IMG_1901.JPEG

IMG_1900.JPEG

IMG_1883.JPEG

IMG_1882.JPEG

IMG_1884.JPEG

IMG_1885.JPEG

IMG_1881.JPEG

IMG_1880.JPEG

IMG_2031.JPEG

IMG_1876.JPEG

IMG_1879.JPEG

IMG_1877.JPEG

IMG_1859.JPEG

Octane Timelapse.gif

Rocket League Octane - HIGH DEF

IMG_3390.JPEG

IMG_3391.JPEG

IMG_3392.JPEG

IMG_3393.JPEG

IMG_3394.JPEG

Glow Glasses - STYLE 2

Modular Desk Tower System

Precision Clearance Test Gauge

Ryobi Link - Mount for 40V Battery Charger

Ryobi Link - Mount for 6 Port 18V Battery Charger

Rocket League Fennec - HIGH DEF

I printed the biggest part of this model twice due to some issue with layer separation. The first time I printed the model with grey ASA and had some minor layer separation even after preheating the chamber to 50C. In hindsight, I probably should have changed the default Bambu filament settings to reduce cooling for overhangs. As you can see, the layer separation happens right in an area where the fans were at 80%. The second print worked perfect with ASA-CF. 

Dopins

Minisforum DEG1 eGPU Dock Enclosure / Case

ABS and PETG - My Chosen Build - v1.1

This print worked perfectly. I used PLA-CF which hid the layer lines really well, added a little strength, and created a nice texture for grip. I used Blue Glow PLA for the internal parts. 

vanbluca

Wireless Mouse 002 - rounded rear

Improved adhesion V2.1 - raised inscription

This print works great. I Have 2 Dobermans so I scaled the size up quite a bit. Scaling it up this big required me to split the TPU bristles into 2 different plates. I used the built in Bambu slicer functions to cut the TPU bristles in half and add a dovetail so they fit together nicely inside the paw washer. 