Epoxy Kit Tray 0.55 Gal A/B w/ Drip Trays

I created a tray to hold my epoxy A/B mix, specifically the 0.55 gal containers with the pumps. I wanted to avoid drips as much as possible but have a way to easily clean it when that happened, along with somewhere to set the containers I was pumping it into, so the front drip tray has 2 removable trays printed in TPU for easy cleaning (though PLA or PETG would work as well but probably not be as easy to clean). The two drip trays should stack perfectly to come up to be even with the top of the tray.

I printed this at 100% infill in PETG because I personally wanted something very solid and already use PETG for most of my practical printing. The tray can easily be lifted by any corner and shouldn't have any issues with flexing even while carrying the weight of the full epoxy containers. I imagine changing the infill to gyroid at 20% would provide reasonable stability while saving some material if you are so inclined.