Soap Dish · Self Draining by jorm

jorm

Household>Other House Models

IP Report

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.08mm layer, 2 walls, 5% infill

Designer

2.3 h

1 plate

4.8(73)

Open in Bambu Studio

Boost

507

1049

889

591

Released

Description

A sleek soap dish that preserves the freshness of your soap, and adds a sophisticated touch to your bathroom decor.

Features

Slanted base and walls for drainage
Ridges for soap to rest on, preventing it from dissolving in water
Angled drain to lead water towards your basin

The dimensions of the dish is roughly 115mm x 75mm, but feel free to resize in slicer as needed.

Do note that the beige version shown in the pictures above was printed at -5.19 degrees to avoid stair-stepping on the tilted plane, while the green one was not. However, the supports were almost impossible / extremely difficult to remove, despite my multiple attempts at modifying the support settings, which is why I have not included it as a print profile. If anyone can figure this out, do upload your print settings :)

check out my other designs!

Boost Me (for free)

prototyping models takes a lot of time and filament, and every boost helps me keep creating！

if you enjoy my designs, consider buying me a coffee :)

Membership

want to sell my designs, or fund my caffeine addiction? join a membership tier!

Join

Bill of Materials

Bambu Filaments

Dark Green

A01-G7-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (95)

@uni_maker

Boosted

Print Profile

0.08mm layer, 2 walls, 5% infill

It works perfectly! Very good design. Looks fantastic with transparent PETG as well :)

@jormy

that filament is gorgeous, thanks for sharing!

@user_4160224822

Superb model but I have flaws I don’t know what the cause might be

The designer has replied

Show original

@jormy

hi, sorry about that. have you tried drying your filament?

@user_4160224822

No, I will try again by drying it. Thank you

Show original

@Bluzxz

Boosted

Print Profile

0.08mm layer, 2 walls, 5% infill

very good

@scr5008

Print Profile

0.08mm layer, 2 walls, 5% infill

great quality and model

@pierm

Boosted

Print Profile

0.08mm layer, 2 walls, 5% infill

A very beautiful model. Unfortunately, the print did not come out well, there are imperfections on the walls, it's the first time this has happened to me and also the first time I've printed with 0.08mm layers. I probably just need to review the print settings. Printed on a P1S with newly opened Overture PLA filament

Show original

@user_2568878195

Print Profile

0.08mm layer, 2 walls, 5% infill

@nornosnibor

Boosted

Print Profile

0.08mm layer, 2 walls, 5% infill

printed for my mom and she loves it!

@lion7718

Print Profile

0.08mm layer, 2 walls, 5% infill

thanks

@user_248189346

Boosted

Print Profile

0.08mm layer, 2 walls, 5% infill

👍🏻👍🏻

@GammaLand

Print Profile

0.08mm layer, 2 walls, 5% infill

works well, thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License