8BitDo Ultimate 2C Stand (Dongle&Cable retainer)
Print Profile(4)
Description
8BitDo Ultimate 2C Controller Stand
Print the ultimate 8BitDo Ultimate 2C controller stand!
This stand has been improved with a slot for your USB dongle as well as a retainer for your USB cable.
Added bonus: It does not matter how you insert the USB dongle. It will fit on the first try ;)
This model is heavily remixed from Jonan Seeley's design. I used it as a reference and modelled it from scratch.
Boost Me (for free)
Like this model? Consider supporting me with a boost. This helps a lot! Thank you!
Print settings
Nozzle: 0.4mm
Layer Height: 0.2mm
Wall loops: 6
Infill: Gyroid 25%
Supports: On in print profile (tree) but possible without (depending on your settings)
You can lower the wall loops to 3 if you want to save a bit of filament. It takes about 10-15mins of the print time which is not huge.
So my suggestion would be to leave the profile as is.
The model is also designed and oriented on the plate to print with minimal to no support.
Enjoy!
This remix is based on
License
Comment & Rating (125)