Toyota Tacoma Auxbeam Switch panel 8 gang - Free 3D Print Model

Search models, users, collections, and posts

💀IAN GORDON💀

Education>Engineering

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 15% infill

Designer

7 h

1 plate

4.3(4)

0.2mm layer, 2 walls, 15% infill, dual material

7.2 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

169

208

Released

Description

Auxbeam 8 gang switch mount for 2016-2023 Toyota Tacoma

i prefer PETG as the item faces 100 degree temps in the hot summers of florida

more picture and bio will be uploaded shortly

UPDATE 01/06/2025

i flipped the switch panel on the buildplate and added supports, which lowered the print time by 2 hours, still no pictures but coming soon revised model is MUCH better

switch panel relocation

buttons

truck

auxbeam 8 gang switch

car panel

body panel

interior

Comment & Rating (27)

@Bastolin

Print Profile

0.2mm layer, 2 walls, 15% infill, dual material

Great print! supports came of easy!

(Edited)

The profile uploader has replied

@Azreal967

thanks for the 5* great pictures!

@Hirschness

Boosted

Print Profile

0.08mm layer, 2 walls, 15% infill

I had to modify the framing of my vehicle behind the 4th button (not shown in the image) However, my truck has 4 buttons included and without the 4th button I would have had to find a way to connect it to one of the buttons on the switch panel I also needed to modify the design as the wire is coming out of the opposite corner, I would have had to install the switch panel upside down to get the wire to come out correctly The orientation did not work well for me and I had to try several orientations to get it to print without failing or being overly brittle I also set the print profile to standard for the same reasons, this may be more of a personal issue though as I do not have the same luck as others in some profiles and printing at any speed above normal results in terrible quality or failure

@user_2965405424

I seem to be having similar issues as well. I've tried multiple orientations of the item itself and it keeps failing. What orientation did you have decent luck with?

@Hirschness

Boosted

Replying to @user_2965405424 :

I put it face down which worked OK, but I have the print plate texture on half and then the weird texture on the other half of the face where it didn't touch the plate I think I need to learn how to do the chemical wash to smooth it out, but I don't know if that works well with PETG

@Hirschness

Boosted

I cant believe I never added a photo! My bad my guy! The lower section had supports so you can tell the difference in the visual quality However, as I have learned more, I found the PETG I use a bit brittle, so in other projects I was able to prevent the clips from breaking by heating them up with my heat gun before inserting I could also probably use PLA instead or another PETG thats not as brittle

@user_1718797884

Print Profile

0.08mm layer, 2 walls, 15% infill

Great fit, worked awesome. Printed in black ASA.

The profile uploader has replied

@LifterTick99

awesome dude im happy to see this

@JBDLWB

Any photos? How easy is it to add another stick switch or two?

The designer has replied

@LifterTick99

currently i owe you a redisgn. i tried 4 times and couldnt replicate a quality print. i will work on this in the morning, get a test print through- then update the profile. my apologies