Coin Tray for Minimalistic Wallets - Free 3D Print Model

Search models, users, collections, and posts

QuantifyDesign

Fashion>Other Fashion Models

IP Report

GIF

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

[EUR] 0.16mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

5.0(6)

[USD] 0.16mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(3)

[GBP] 0.16mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(3)

[CAD] 0.16mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

187

232

155

Released

Description

Boost Me (for free)

The creator will be greatly motivated by your ratings and boosts. ⭐⭐⭐⭐⭐

General Printing Tips:

*For beginners* Brim or Glue is Recommended, and/or the plate initial temperature can be increased by 8°C to improve bed adhesion, especially for A1 and other “bed slinger” type printers.
Keep the print settings as it is for optimized print quality.
Printer calibration is essential for successful prints, especially for challenging models. If you have altered the nozzle and fan settings, i.e. flow rates, temperature and cooling speed, the designer is not responsible for failed prints.
If fitting is too tight, it will loosen up over time. You can also cure the print by gently heating it up with a hairdryer or wash it with warm water.

Several features added to this model

Filleted edges added such that coin tray does not get stuck with cards.
Inner heights adjusted to fit USD, EUR, CAD and more coins.
Print layer reduced to 0.16mm for finer finish
Print speed reduced for inner/outer wall for aesthetic.

Designed by Qfy.

Membership

Join

Comment & Rating (23)

@Pete_Pixel

Boosted

Print Profile

[EUR] 0.16mm layer, 2 walls, 15% infill

fits and works ig

The profile uploader has replied

@QuantifyDesign

this is great! thanks for rating

@BrissyBoy

Print Profile

[CAD] 0.16mm layer, 2 walls, 15% infill

Great print! I used the Canadian version and it works well with our coins over here. Fits perfectly into my minimalist wallet. Thanks for making this available!

The profile uploader has replied

@QuantifyDesign

Looks good! I'm going to publish a tray with springs to dampen the noise the coins make.

@user_1910201866

Print Profile

[USD] 0.16mm layer, 2 walls, 15% infill

works great thank you!!

The profile uploader has replied

@QuantifyDesign

thank you for rating! :)

@christoffn

Print Profile

[EUR] 0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@QuantifyDesign

Thank you for printing the EU version! I'm glad it works for you!

@christoffn

Replying to @QuantifyDesign :

works Perfectly fine with my Ridge Wallet, Thank you :)

@NikoD

Print Profile

[EUR] 0.16mm layer, 2 walls, 15% infill

Perfect print.

@user_2716930952

Print Profile

[GBP] 0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@QuantifyDesign

thank you for rating!

@jwfchu

Boosted

Print Profile

[CAD] 0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@QuantifyDesign

Thank you for rating!

@Randomhero343

Print Profile

[GBP] 0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@QuantifyDesign

thank you for rating

@user_3815242266

Print Profile

[EUR] 0.16mm layer, 2 walls, 15% infill

The profile uploader has replied

@QuantifyDesign

thank you for rating! :)

@oluapasuos

Print Profile

[EUR] 0.16mm layer, 2 walls, 15% infill

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.