A1/A1 mini Lightweight Bamboo Waste Comb-Shaped Anti-Adhesion Splash Guide (4g) - Free 3D Print Model

Search models, users, collections, and posts

a.m

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 6 walls, 15% infill

Designer

24 min

1 plate

4.9(16)

Open in Bambu Studio

Boost

119

187

144

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

While using the A1 and A1 mini, I discovered that waste material sometimes ejects diagonally upward. This phenomenon occurs more frequently during multicolor prints, as monochrome prints only generate waste at the beginning, whereas color changes produce waste on every layer. To prevent this scattering of waste, I designed this solution

This design complements my other waste chute

Waste sometimes ejects from the top (blue line) and diagonally upward. Now, even high-velocity waste is contained

Streamlined design minimizes waste splatter

Comment & Rating (20)

@nathxnazuur

Print Profile

0.2mm layer, 6 walls, 15% infill

The deflector is very good !!! It's was a little bit hard to put it in place, but it works fine!

The profile uploader has replied

@amam

Its mesh is inherently flexible and possesses a degree of elasticity, designed to be secured during installation by snapping onto a screw hole on the machine. If installed correctly, alignment will be achieved, as illustrated.

(Edited)

Show original

@amam

Alternatively, you could try installing it this way

(Edited)

Show original

@nathxnazuur

Replying to @amam :

thank you for the explication ! i will update my note, and after print, the deflector is very good!

@jestrprints

Boosted

Print Profile

0.2mm layer, 6 walls, 15% infill

Look, the print came out very good, but it was incredible delicate to work with. Felt like it would snap at any moment while trying to put it on. Would much prefer a sturdier version. However, the design is excellent and, so far, none of the waste gets stuck to it like my previous one. Thank you very much for a thoughtful design.

@user_2241045628

Print Profile

0.2mm layer, 6 walls, 15% infill

this is really helpful and is a very short print!!

@arkus_12

Print Profile

0.2mm layer, 6 walls, 15% infill

wownice

@user_2665854179

Print Profile

0.2mm layer, 6 walls, 15% infill

@Fotbrenda

Print Profile

0.2mm layer, 6 walls, 15% infill

@user_1772421487

Print Profile

0.2mm layer, 6 walls, 15% infill

@user_2830513222

Print Profile

0.2mm layer, 6 walls, 15% infill

@Claudio79

Print Profile

0.2mm layer, 6 walls, 15% infill

@user_3660989579

Print Profile

0.2mm layer, 6 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.