63" Bolt Holder Stinger Yak Mey Interceptor
Print Profile(4)
Description
Once removed from their packaging, the bolts tend to scatter everywhere in the bag.
This was quite annoying!
I couldn't find a solution online, so I designed my own. After several hours of experimentation, this variant seemed the most sensible.
- The holders are designed to accommodate all brands and generic 6.3” arrows/bolts (at least all those I own, from full plastic to aluminum and carbon)
- I recommend printing the holder with PETG, at minimum. PLA might be too inflexible, but it's worth a try… I tested TPU; the material is too soft and doesn't work.
One holder suffices to keep the arrows together; for enhanced stability, I suggest printing two or combining this variant with: https://makerworld.com/en/models/904273#profileId-864013
 |  |
When inserting the bolts, ensure the vanes/springs are aligned evenly to prevent interference.
Four variants are available for 6, 10, 12, or 20 bolts.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)