Lift Table 130x100 - Free 3D Print Model

Search models, users, collections, and posts

mishkin2

Tools>Hand Tools

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

8 h

4 plates

4.6(79)

Open in Bambu Studio

Boost

715

1689

1.7 k

843

Released

Description

Summary

There are no details here except those that you can print yourself.
Supports should only be set when printing Base_gr and Base_top, the overhang angle of the support is 82 degrees, so that the support is not printed in the holes, otherwise they will be difficult to clean.
All the details are located in the files with the orientation as they should be printed. The required number of parts is multiplied for successful assembly.

The platform dimensions can be easily modified, increasing to 250 mm if necessary for your needs. During the test, the platform withstood 5 kg of cargo.

https://youtu.be/yLBAJbY2BgQ

Print Settings

Rafts:

Supports:

Resolution:

0,2

Infill:

Comment & Rating (97)

@dralukic

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

good. only print 2 extra 14mm bolt

@PrintNate

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

Perfect

@Frog01

top

@jo2456

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

top

(Edited)

@RosePrints

increased the size to fill a P1S bed and works great. As other comments have said, though, the print profile needs amending as there are the wrong number of bolts. You need six 14mm and two less of the smallest ones

@user_3062577096

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

The posted files didn't have the correct parts count, as noted by other users. A little fiddly to assemble and a little floppy, yet still quite useful for several of my hobby projects.

(Edited)

@PLAboyPrtz

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

fun print :)

@aldomontoya

nice one, once I figured out how to build it!

@Eloi

Boosted

very nice lift

@Chap.eau

Print Profile

0.2mm layer, 3 walls, 10% infill, brims and supports enabled where needed/suggested

A fun print! - missing 2 x screws (bolt14mm) The other reviews are useful as a guide on how to assemble. I do wish the tolerances were a bit tighter though. The screws only just hold and the platform is quite soft and wobbly. The platform is functional in PLA. I tried a silk PLA for fun but even printed slowly the parts were not tough enough.