Cat Cool with Glasses Key Holder

Search models, users, collections, and posts

3DXAV

Household>Other House Models

IP Report

GIF

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

14.6 h

2 plates

4.8(32)

Open in Bambu Studio

Boost

1662

2849

2.6 k

450

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Bambu Filaments

Select all

Description

Content has been automatically translated.

Show original

Interested in selling my models?⬇️⬇️⬇️

Membership

Click Join to obtain a commercial license!

Join

INSTRUCTIONS:

- There is a pause in the model at layer 8 to insert 10x2mm neodymium magnets; you will need 3
- You can find an assembly video here; it's incredibly easy, and everything works with plastic

https://www.tiktok.com/@3dxav/video/7450236764708556037

NOTE: I added two spring models, one thicker than the other, for enhanced support; you can use whichever you prefer depending on the weight you intend to add. If printed in PLA, these springs may lose elasticity over time, so I suggest using PETG or reprinting them periodically; it won't consume more than 2g of material.

• You can scale the springs along the Z-axis to increase the system's load capacity by adding thickness.

• You can scale the entire model to a larger size; just don't scale the lid along the Z-axis so that the magnet holes maintain the same height. The only detail here is that the space for the magnets will have a larger diameter, but this is not a problem since they are embedded inside the piece.

Comment & Rating (59)

@user_1832273987

Excellent model, I made it in a single color (white), and then painted it with acrylic, I hope you like it

The designer has replied

Show original

@3dxav

Wow, this is incredible! I loved it. Seriously, thank you for bringing this design to life. I'll put your photo on the model's profile✌🏻

Show original

@user_765697899

That looks fabulous!

@user_1423749648

Hello, do you have the magnets

Show original

@user_3734437727

I modified the lever as it was too heavy for the lenses to fully lower, and it's now perfect. I also modified the rear section so it's secured by a screw. Thank you for the model

Show original

@diazmarwin

I think there's an error in the design or I don't know if it's my slicer

The designer has replied

Show original

@3dxav

I think it's your slicer, friend, are you using a 0.4 nozzle? Even though I use Orca Slicer and everything is fine. Should I upload the G-Code

Show original

@3dxav

The same file

Show original

@3dxav

Replying to @3dxav :

BambuStudio:

@user_4204373811

Print Profile

0.2mm layer, 2 walls, 15% infill

Very beautiful, a superb design

The profile uploader has replied

Show original

@3dxav

Thank you for bringing it to life

Show original

@Reci

Boosted

Thank you so much for sharing, but I was unsuccessful Hours of printing and this is the result 🥺

Show original

@TharienElje1994

Very nice going to try it, create one that is a dog pleeeeaaaase

@honza1922

Print Profile

0.2mm layer, 2 walls, 15% infill

model 👍

The profile uploader has replied

@3dxav

Nice!!!

@rashik

printed at 75% scale because multi-color AMS print takes too long. Even at 75%, it took 9+ hours with 200+ grams of filament. Final result is really cool 😎

@user_2155472131

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The design functions exceptionally well, I loved the print, it turned out brilliantly, the lines are almost imperceptible, it wastes a considerable amount of material during filament changes, but in my opinion, it’s worthwhile, the details of the eyes, ears, and nose are perfect

Show original

@user_2668797419

Very good, but do you know what could make it better, if the face could be printed separately and then glued or fitted, this would drastically reduce printing time, but it is an excellent model!! good job!!

@user_1682360377

Please a1 mini

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.