football & key chain NO AMS - Free 3D Print Model

Search models, users, collections, and posts

Eric.cartman

Toys & Games>Outdoor Toys

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

2 plates

4.7(402)

Single plate printing, no plate change

1.3 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

3702

8990

461

157

9.2 k

5.7 k

Released

Description

Football that does not require AMS

Quick printing

If you don't like keychains

Just copy a black part without holes

Installation diagram:

Comment & Rating (461)

@turkuaz3d

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The model is awesome, but I needed to change some settings for the supports. I added the settings as a photo for Bambu Studio.

(Edited)

@pauloweb

I used these settings, it turned out very well, thank you!

Show original

@Mckanone

Great model and this is the second time I've printed it BUT the parts fit incredibly tightly as you can see It looks a little like an oval even with outer inner wall order you need incredible tolerances for it to fit without hammering the parts in. This is the second time I've printed one and even after tweaking some settings on my p1s I still couldn't make the fit perfect. Before you assemble it make sure to wear down the top and bottom white pieces and the peg of the black pieces cause those WILL NOT fit unless you do that or have a perfect printer. 9/10 model nice gift to soccer addicts

(Edited)

@natrajravikumar

Print Profile

0.2mm layer, 2 walls, 15% infill

please print in this direction to get it perfect. Other than this this is sooo cool.

@user_2905845746

how do I change the direction my print detached from the base 😩

Show original

@BRCXCSO

I have tried to print the middle piece five times now on two different printers, with different print speeds and plate temps. It has spaghettied once and the other times it makes a mess on one or two of the same part. it’s a shame because th rest printed correctly. Any ideas on how to correct this?

@Maksim_K

Set support to NORMAL (AUTO). It worked for me.

@chvatalcastle

Boosted

same issue! have printed about 20 of these before and no issues. now, it gets about 1/3 of the way and all spaghetti! 2 printers same results!

@Griff1982

Had the same issue, just the middle. I will try supports next time.

@mariepat83

top

@moez15

so cool! did you paint that or did the machine do it?

@user_2632281211

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Easy to put together, but you need to use a hammer.

@user_3929670492

truth, I just fitted it with a hammer. lol

Show original

@jazzbonerbike99

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Supports came away easily, and it all snapped together without much fuss - it's snug, but worked well for me!

@Xiosk

Did you change any settings at all for the supports?

@Cassiords88

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you for making the file available! Easy and quick to print and assemble!

(Edited)

Show original

@veru_95

hello, I have a question for you, what adjustment did you make to be able to assemble it? because I printed it several times and I couldn't, the pieces don't fit together. thank you

Show original

@Cassiords88

sorry for the delay, but I haven't touched anything from the original file, it fits very snugly, you have to apply a little force

Show original

@jekatilla

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints beautifully Assembles easily Holds securely

Show original

@Xiosk

Can you share the settings you used for the middle layer for supports? I would greatly appreciate it. The top and bottom are so smooth, but the middle is really rough and more matte. Could you also share how you did the letters so awesome so I can save those settings forever haha. You can email me or reply here if you want. Xiosk@hotmail.com. <3

(Edited)

@Griff1982

Replying to @Xiosk :

Same. My middle section isn't working. I tried tree supports same. Now trying normal supports and increased nozzle temp

@user_1667126600

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed this on my A1 Mini with Bambu Silk White and Basic black. Print turned out awesome. I broke the first one assembling which was my own fault. Using that experience the second print went just as good and assembled great. It is snug but I appreciate it because I don't see it coming apart. my daughter loves it.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.