Skadis table support - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Nui

Household>Office

IP Report

Print Profile(4)

All

P1S

X1 Carbon

P1P

H2D

H2D Pro

H2S

P2S

H2C

X1E

X2D

A2L

A1 mini

0.2mm layer, 6 walls, 25% infill

Designer

9.3 h

2 plates

4.9(73)

50 mm screw

Designer

23 min

1 plate

5.0(2)

45 mm screw

Designer

22 min

1 plate

0.2mm layer, 6 walls, 25% infill

5.1 h

1 plate

5.0(12)

Open in Bambu Studio

Boost

691

2695

105

1.8 k

1 k

Released

Description

The support that this design is based on, I have printed on another smaller skadis and holding smaller things and it works fine. For another larger one that had to hold more weight I thought it wouldn't be enough. I had the problem of not being able to drill the wall, so I modified the file by adding a support under the table. It is designed for a 30mm table. If it is wider it may be just right.
It is printed in PLA.

17/12/24 A version for tables up to 50 mm has been added by adding reinforcement in some parts.

09/01/26 Added new 45 and 50 mm screws

skadis accessory holder

Comment & Rating (105)

@schnitzy80

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

super so that nothing more falls off the desk

Show original

@jouster

looks great, what is the max table thickness please?

(Edited)

The designer has replied

@Nuii

You're right, I didn't put it in the description, it was designed for my table which measures 30mm. If the table measures less there won't be a problem but if it's wider it might be just right. I'll add it to the description

@jouster

Replying to @Nuii :

thanks i did load it into studio in the end and without the clamping parts it would just fit my desk but not enough for them to then be clamped ..looks great though so thanks for posting

@Nuii

Replying to @jouster :

@jouster I'll try to make a bigger version.

@user_2578464703

Boosted

absolutely great way to hold a skdis board you buy or print. i have a thin top table so I had to make the screws longer but easily doable. I hadn’t realized till I went to install and realized it wasn’t long enough. It is an otherwise a magnificent solution.

@Noses82

Print Profile

0.2mm layer, 6 walls, 25% infill

Very good and stable mount fits well and is easy to install

Show original

@impresion.ddc3d

Boosted

It worked perfectly We printed it in PETG and everything went well Thanks for the design

Show original

@romanila

Print Profile

0.2mm layer, 6 walls, 25% infill

Thanks a lot, this is probably the most stable table mount for skadis. The printing time was definitely worth it, great work!

@gintrace

Print Profile

0.2mm layer, 6 walls, 25% infill

much more stable than other designs, easy print

@BigCheesus

Print Profile

0.2mm layer, 6 walls, 25% infill

great product and fits my desk perfect. I printed the larger version. wondering what screws to use to secure the board to the clamps?

The profile uploader has replied

@Nuii

Hi! This design is intended for an Ikea Skadis board. To secure the board to the clamps, you just need to reuse the screws that came included in the original Ikea package (the ones that are intended for wall mounting).

@BigCheesus

Replying to @Nuii :

works great thanks!

@user_3943642749

Replying to @Nuii :

Is the screw also available for printing? I printed the Skadis plates myself, so no screw either :-)

Show original

@user_2079194825

Unfortunately, the screws are far too tight. The table protection is too loose. Unfortunately, the print template is not very good

The designer has replied

Show original

@Nuii

Thanks for the comment. Just to share my experience: I've used this mount for over a year with zero issues or wobbling. About the screws: they are designed to be tight on purpose. Since PLA is not very resistant and tends to yield, the tight tolerances ensure it holds firm. Once you get past the initial resistance, the thread becomes smooth and easy to turn.