Bambulab CMYK LED Lithophane frame - with magnets - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Lucci

Household>Decor

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 4 walls, 35% infill

Designer

5.2 h

3 plates

4.9(103)

Landscape Orientation - Power Connection on Top

9 h

4 plates

5.0(7)

Open in Bambu Studio

Boost

619

1662

164

1.9 k

880

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

CMYK LED Backlight Board (1pcs) - FAZ007

Bambu CMYK LED Backlight Board

Round Magnet

Description

This is the first model I'm posting and it is a remix based on @maCyo42 remix of Bambulab's CMYK LED Backlight Board frame.

It doesn't require any support besides for the stands.

It uses 6x3 magnets to close the frame after inserting the LED board and diffuser plate.

I've also added 2 stand sizes with about 5mm difference.

I added the Fusion360 files to let you modify the magnet hole size in case you have different magnets than 6x3mm.

Official Bambulab printing instructions for lithophane : https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions

MakerLab's Lithophane creation tool : Make My Lithophane

Personal touch :

I added adhesive rubber feet to prevent the frame from slipping, and I used an angled USB-C adapter because the frame was resting on the USB-C power adapter cable I used.

Adhesive rubber feets : Uni-Fine 4 Tailles Transparente Pieds Adhésifs pcs, Patin Antiderapant Antibruit, Butées de Protection en Caoutchouc, Idéale pour Tampon Meubles : Amazon.fr: Bricolage

Angled USB-C adaptor : MOGOOD USB C Adaptateur à 90 degrés C mâle à C Femelle USB C Adaptateur Extender Type-C Data Transmission PD100W Charge Rapide et 8K @ 60Hz Passage pour Les Accessoires de Pont Vapeur : Amazon.fr: Informatique

USB-C Power supply with on/off switch : GeeekPi Alimentation Raspberry Pi 4,Alimentation USB C 5V 4A 20W avec Interrupteur Marche/arrêt Prise EU,pour Raspberry Pi 4 Model B 8go/ 4go/ 2go/ 1go,avec Un Adaptateur Micro USB pour Pi 3B+/3B : Amazon.fr: Informatique

Comment & Rating (164)

@Makermax101

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

Good model! Magnets hold in the picture (in a way)! Printed in PLA-CF

@user_3895326735

What dimensions did you take for the lithophane so that it fits? Greetings Andy

Show original

@Makermax101

Boosted

Replying to @user_3895326735 :

Colorful Litho with Fixed Frame on Make My Lithophane (MakerLab)

@Julian_J3D

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

Much better then the other versions available

@user_1437608097

Hello, what measurements did you use for the lithophane

(Edited)

Show original

@tWiSt80

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

@burakcand

It looks very nice. Do you have a chance to share the light version of the image? I have a P1S and the human faces appear red. I couldn't solve the problem? Do you have any information about this?

@DAN_EE_14611

Boosted

printed good with minimal support on the kick stand. boosted for sharing the awesome model

@Bergmanndw

Print Profile

0.16mm layer, 4 walls, 35% infill

Good fram, only problem is that the kick stand easily comes off.

@OldLady

Print Profile

0.16mm layer, 4 walls, 35% infill

It turned out great. A picture with dimensions of 1.25 × 143 × 108.5 fits perfectly.

@Gintrius

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

Nice but not fit standart Bamby litophane thichness.

@user_4211101834

I only have 8x2mm magnets, is there a way to edit this in BBL studio? I don't have fusion360

The designer has replied

@Makermax101

Boosted

I opened the F3D file, and it seems like a diameter of 8mm is just on the line of being too big.

@Maxime.lucci

Replying to @Makermax101 :

I just tested with a 8mm hole and can confirm it's too big, here's the result in the slicer

@user_4211101834

Replying to @Maxime.lucci :

thank you for your reply. I have ordered some 6x3 on the way. I did print out a few of the frames but noticed that it doesn’t quite sit flush with the lithophane frame. is it because of different pla texture / expansion? if so, do you know how I can fix this in BBL? or is this normal. thanks.

(Edited)

@Magik

Boosted

Print Profile

0.16mm layer, 4 walls, 35% infill

@user_3952123058

I just got my 0.2mm hot end and CMYK kit today. I currently have this printing. My question is, do you have a light diffuser panel for it? Or will the light diffuser from the frame you remixed from fit?

(Edited)

@epeporoni95

Currently going to print this frame + original Bambu CMYK diffuser to let you know. Remixed version from @maCyo42does does not include an STL for diffuser either, assuming it's because it's the original CMYK Bambu diffuser.

@user_3952123058

Replying to @epeporoni95 :

This morning, I decided to print just the diffuser from the one linked below. it fit just fine. I really like the design of your frame. I didn't have any magnets on hand, but going to order the ones you used. I have the back leg printing now. When that gets done, I'm going to change my P1S over to print a color litho. https://makerworld.com/models/47748

(Edited)

@epeporoni95

Replying to @user_3952123058 :

(I'm not the person who posted this design, just figured I'd try to help) BUT in turn I did not realize the color litho gives you a diffuser when you download your litho. That is the diffuser I will try to use and it seems it might be the same one you linked below. Hope all prints well!

(Edited)