Optimized Litho Frame for Bambu CMYK LED Backlight Board - Lithophane Remixed by maCyo42

Remixed by

maCyo42

Art>Other Art Models

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 10% infill

Designer

3.6 h

1 plate

4.6(95)

8mm higher for wider Angle in Portrait 0.16mm layer, 2 walls, 10% infill

Designer

3.5 h

1 plate

4.5(6)

0.16mm layer, 2 walls, 10% infill

4.2 h

1 plate

4.9(11)

Boost

177

284

133

800

1.1 k

Released

Description

Featured Remixes/Mods

This is an optimized Version of Bambu Labs Lithophane Frame.

Closed Frame
wider Angle for the Hinge
less Material about 103gr
on a minimum reduced Support Structure
Hinge is removable to replace it e.g. with a wall hook
closing mechanism
many small improvements

NEW v2 Online

shorter Pins lower risk of breakage

NEW v2 - "long Bottom" Online

features of v2
+ 8mm higher Frame - extension under the bottom for wider angles of the Frame

Instructions Lithophane: https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions

Bambu Store Links
PLA CMYK Lithophane Bundle: https://eu.store.bambulab.com/products/pla-cmyk-lithophane
Bambu CMYK LED Backlight Board: https://eu.store.bambulab.com/products/bambu-cmyk-backlight-board?variant=46880852935004

RELEASED 20231213

Issue: Oftentimes reported broken Pins
I try to reduce the broken Pins by reducing the length. If the Test is good theres an update this evening (20231213). Second issue is reducing the thickness of the clamps on the back to also reduce the broken ones. And i plan to release a second bottom Part to increase the height of the Frame to make a larger angle possible because of long usb c Cables. Stay tuned

Comment & Rating (133)

@devin.d.ford

Print Profile

0.16mm layer, 2 walls, 10% infill

Worked great, hinge for the frame arm was a tiny bit loose, just applied a little pressure to curl it down but other wise all tolerances were great! I ended up gluing down the litho since this is a gift and won't be changed, would love a version that slots the litho in as well to secure it.

The designer has replied

@maCyo42

nice 👍 i think a slot for the litho doesn't work because it has different heights.

@devin.d.ford

Replying to @maCyo42 :

Yea that is fair, might try to play with a solution in fusion to maybe add small tabs at the top and bottom to secure it from falling out when tipped forward.

@NiceCreate

Print Profile

0.16mm layer, 2 walls, 10% infill

Works great and better then the Bambu one. But maybe it would be good to have holes in both parts and use dowel as pins. Then you can print the dowels flat what would make it stonger. But I had not problems with it.

The designer has replied

@maCyo42

good Idea 👍

@joeturczak

Print Profile

0.16mm layer, 2 walls, 10% infill

I logged this box way better than the Bambu model. so much easier to put the light board and diffuser in it. I like the frame stand better too. It doesn't feel like you'll knock it over easily.

@BiosBrain

Print Profile

0.16mm layer, 2 walls, 10% infill

Good frame!

(Edited)

@m13d

Print Profile

0.16mm layer, 2 walls, 10% infill

printed easy, no issues at all!

@PTRC

Print Profile

8mm higher for wider Angle in Portrait 0.16mm layer, 2 walls, 10% infill

Definetly better looking frame then the original one. I like its simplicity! The hangers are useless, since PLA will just break when its printed thin and long. Nothing can be done about that though.