Beatles - Help! - Dimensional Mosaic

Based on the incredible work of w3r3wolv3s, I'm creating a series of Beatles dimensional mosaics. This one features the album cover art from the US release of Help!

This is sized for the A1 Mini. Unlike my other dimensional mosaics, these Beatles mosaics are larger and take up pretty much the entire bed. The reason for this is due to the amount of detail on them, some of which will be lost if you reduce the size. Of course, using a .2mm nozzle head may allow you to print smaller without losing details, but I have designed this for a standard .4mm nozzle. If you have a larger printer and want to scale it up, only scale the x and y axis as it assigns color based on layer height. I do not recommend scaling the z axis, but if you do you will have to reassign where the color changes take place.

This print does use 6 colors so you will have to make 2 swaps. I recommend starting with White, Yellow, Blue, and Red. I've placed two pauses in the print where you will be able to make both of the swaps. During the first pause you will swap White for Orange, and the second pause you will swap Yellow for Black.

Please note, as is the case with all my mosaics, the colors will not appear until you slice the plate, but I promise you they are there.

This is fan art and is not licensed by The Beatles, please do not sell copies of it.

Also check out these dimensional mosaic accessories:

Dimensional Mosaic Logo Chain Necklace

Dimensional Mosaic Stand / Holder