Dimensional Mosaic Logo Chain Necklace

Want to look good at the game?  Now you can!  Introducing the dimensional mosaic chain necklace.  This model produces a chain with a dimensional mosaic base that can be used universally with any of my dimensional mosaics.

It is available in 3 different sizes, 156.87mm for my standard A1 Mini mosaics, 175mm for my larger A1 Mini mosaics, and 250mm for my standard A1 / P1 / X1 mosaics.  Please note, the A1 Mini profile has the smaller two bases, while the A1 / P1 / X1 profile has all 3.

Construction is simple, the chains just link together by lining up the slots, and the base connects in the same fashion.  The profiles contain 2 plates of chain links in different colors with 15 links each.  I've found that 24 links is about the perfect amount for me, but if your taller maybe you'll want some more and 15 fills up the A1 Mini plate.  Of course, I recommend printing them in your teams colors.  The base I printed in white as that works with pretty much any logo, although you're free to print it any color you like.

While you certainly could glue a mosaic onto the base, that seems a little wasteful to me, so instead I use the 3M velcro-like Command strips, which is also how I hang all of my mosaics on my walls.  Not only does this allow you to take a mosaic off the wall when going to a game, and putting it back up afterwards, but it also means you can print a single base and use it with all of your mosaics.

One word of warning, using the larger 250mm diameter mosaics may not be the best as they are fairly large and heavy.  While I don't mind wearing it around the house for a few minutes, I don't think I'd want it around my neck for 3+ hours at the ballpark.  Personally, I'll be wearing the 156.87mm diameter mosaics when I go to games.

And don't ask me where I got 156.87mm from, but its what I've been using since the very start so I'm not changing it now.

Also check out my Dimensional Mosaic Stand / Holder