Nespresso Capsule Holder

Nespresso capsule holder for sticking on. Can be directly attached with double-sided tape to common machines, walls, or cabinets. I attached mine to the machine, and the machine itself is installed in my camper van. This way, everything is stored securely and within reach

Update 24.04.2026:

A version with even more tolerance, which hopefully now also allows plastic capsules. Unfortunately, I cannot test it as I do not have any plastic capsules. Please let me know if it is still too tight. You don't always have to print the entire model; for tolerance issues, you should always print a section with the slicer to verify your printer settings

Update 17.11.2025:

There are now two versions: one for tightly fitting aluminum capsules that is also suitable for horizontal mounting. If the printing parameters are correct, nothing will slide out, even on curves. The other variant only holds the capsules during vertical mounting

Further clarification due to many misunderstandings:

Please only print the tight version if you want a firm hold for aluminum capsules. This is urgently needed if you want to mount the capsules horizontally underneath the upper cabinet and prevent them from sliding out on curves. It was developed for camper vans and not for household kitchens

So please do not give a bad rating, firstly because the entire Bambu rating system is only about whether the provided file is easily printable and not whether it suits your taste! Few here have understood this. Secondly, please do not give a bad rating if you are looking for a holder where the capsules easily slide in and out. For that, please choose the loose plastic capsule variant