Nespresso capsule holder by danospeti

danospeti

Household>Other House Models

IP Report

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

Balanced: 3 walls, 15% infill @0.20mm

Designer

1.9 h

1 plate

4.9(107)

Balanced w/ ironing: 3 walls, 15% infill @0.20mm

Designer

3.6 h

1 plate

4.7(15)

Open in Bambu Studio

Boost

261

579

128

111

1.1 k

830

Released

Description

This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules.

Print Settings

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2mm

Notes:

No supports required, print on flat side.

Post-Printing=============

Use double sided or 3M tape to stick it to the side of your machine.

Category: Kitchen & Dining

Comment & Rating (128)

@keph

Print Profile

Balanced w/ ironing: 3 walls, 15% infill @0.20mm

Print quality is overall very good and the design is really functional (although it seems just a little too big to be mounted on the side of the coffee machine - the top sticks out a little rather than being flush) my one gripe, specifically with the profile, is that even looking at the printer head out looks like it's way too slow for what it is. But then again, if you're overnighting this anyway, it's probably not a big deal

@mizifih

Looks alright in the designer picture. What model do you have? My machine is slightly different than his but uses the same capsule. I was wondering if you and I have the same machine, different than his. Did you get it working in a different orientation?

(Edited)