Sphere - Free 3D Print Model

Search models, users, collections, and posts

Padoxik

Art>Other Art Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

26 min

1 plate

4.4(32)

Open in Bambu Studio

Boost

150

261

1 k

554

Released

Description

This is a model of a sphere.

The diameter is 15 mm.

The model is printed in its entirety, without any cuts, so it is not very accurate from the bottom side.

There's a big difference between printing this model with a 0,2 nozzle and a 0,4 nozzle.

Comment & Rating (49)

@Tylergraus

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

It is really cool. Nice design

@RogueOhio

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Bit rough on underside.

@mikokeke

this is normal

@A1Cap0n3

lost 1 ball to our bingo game. this is the perfect replacement sphere for the classic cage bingo games. printed using wood pla, only light sanding necessary. thank you for this awesome file!

@js_int

Tips for creating a 200mm diameter sphere? 0.4mm or 0.2mm nozzle? I generally print with a 0.4mm nozzle and 0.08mm layer height

The designer has replied

Show original

@Padoxik

200 mm diameter sphere is quite large. Remember to turn on supports and you can set the infill to 10% or a little less to shorten the printing time and use less material. With such a large sphere, I would choose the 0.4 nozzle if it comes to choosing between 0.2 and 0.4. But in general, I would think about whether I want to print such a large sphere, unless you want to check whether the printer can handle it :D I also don't know if it was supposed to be 20 mm instead of 200 mm :D

@js_int

Replying to @Padoxik :

Hello, no, this is not a mistake I need to make the sphere 200mm but the assembly of the two in use does not hold knowing that I added an intermediary piece to assemble the two

Show original

@Padoxik

Replying to @js_int :

And how did it go with the sphere? Were you able to print it and assemble it? 😁

@Neon_the_cat

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

um.....

@user_2731531044

⚽️

@Emmccaff

it could be helpful every so and when when you need marbles at a last minute moment

@ekriz2027

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Nice circle

@user_559601548

Is it available hollow

The designer has replied

Show original

@Padoxik

Unfortunately not

@Big_Louie_2000

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Simple yet eloquent

@user_2971104284

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

So amazing

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.