Covered Toothbrush Head Cover

Summary

My toothbrushes are in the same room as our toilet 🚽 😭 this was my solution to cover them while allowing them to dry properly.

I designed this for Oral-B toothbrush heads, but it should fit for most brushes, including full size ones. Good luck!

For the hinge, I used a 2mm rod cut to size, but I've also used a piece of 1.75mm filament before (the hole is 2.15mm in diameter)

I used some 3M tape to attach it to the wall.

If you need a tighter one let me know and I'll try my best to reupload an updated model :)

If you like the design, consider supporting <3
https://ko-fi.com/alexnguyen0