This version of the model is has been adjusted and upsized in conjunction with the collaboration with TheCraftyMaker's Hueforge Wall Mountable Frame. The frame is NOT included in this download, please visit TheCraftyMaker's profile to download the frame.
This print is now 210mm x 150mm, slides in perfectly into the frame, and you can now have a wonderful piece of junk hanging from your wall in NO TIME!
This is a completely print in place model, no supports needed. The print instructions are below.
For the version compatible with the shadow box frame, download the models titled 'FalconForFrame'.
Print Instructions:
Filament Swaps: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
Swap Instructions:
The beautifully designed shadow box frame can be found here. The images used in this description belong to TheCraftyMaker, who printed and framed this version of the model.
The wonderful Millennium Falcon model was sourced from here by Gareth42. If you haven't yet, you should definitely print the standalone model, because it it marvellous!
Have fun, and let me know how you go with the print!
_____________________________________________________________________
If you like my models and would like to support my 3D printing endeavours, I now have a Patreon!
Subscribing to the $10AUD tier will grant you a commercial license to sell the physical prints of any of my models.
_____________________________________________________________________