This filament sample holder is intended to be used with the samples created by Extrutim and can be found here.
Update 2024-02-12: I have created a v2 of the model with a small lip to hold the samples in place when opening the AMS.
I have made the sample holder to be able to stick to the AMS of Bambulab, so I can see which filaments are in there in which position.
On the filament samples I print the hotend and bed settings as well, so I know what to use as recommended settings.
My workflow is to always create a filament sample for each new filament and keep it in the box that I printed by Extrutim. When switching filaments, I also replace the sample in the holder.
What you additionally need:
I used the following settings to print in 1.75 PETG with 0.4 nozzle:
layer height | 0.2mm |
walls | 2 |
top shell layers | 2 |
bottom shell layers | 2 |
infill | 15% grid |
raft or brim | none |
support | no need if oriented right way up |
Leave a like, make or remix as you like!