One Piece TCG Rugged Deck Box

One Piece Jolly Roger Deck Box Lids. This is a Remix of a Remix inspired by another Remix of Whity's Rugged Box

• https://www.printables.com/model/258431-rugged-box-parametric
• https://www.printables.com/model/514964-rugged-commander-deck-box
• https://www.printables.com/model/937856-assassins-creed-rugged-commander-deck-box-lid
• https://www.printables.com/model/644292-gasket-inlay-for-rugged-commander-deck-box

The cover picture is a print of two designs, printed on an X1 Carbon and a third party PEY Plate. The provided profile for the X1C has thin walls enabled and a slower initial layer print speed to allow for better design details. No supports or brims were needed in this case.

Existing Jolly Roger Designs Inspired by:

• Luffy / Straw Hat Pirates (2 different designs)
• Zoro (Post Time Skip)
• Law / Heart Pirates
• Shanks / Red Hair Pirates
• Ace / Spade Pirates
• Doflamingo / Donquixote Pirates
• Blackbeard Pirates
• Cross Guild (Buggy, Crocodile, and Mihawk)
• Hancock / Kuja Pirates

I could potentially add more in the future, if there is a demand for certain designs. Some designs also have an inverted variant, as their stencil/silhouette may not be ideal compared to the negative. Most designs were grayscale'd PNGs quickly converted into SVG, so they may not be true to the canon jolly rogers.

I've also provided STLs for all of these lids, and some modifications to the box itself. The original Magic Commander Box has a gasket tooth and I've opted to remove in favor for a PLA/PETG ornament color gasket trim (instead of the typical flexible filaments). Originals of the lid and box are also provided, but not in the profiles.

The original X1C profile is organized in such a way to reduce the amount of plates shown, so some reorganizing may be needed, and may not be suitable to insta-print off the app. 

NOTE: This version of the rugged box fits M3 screw heads. In the pictured print, I used 6 M3x0.5x30mm Black Steel Alloy Hex Bolts. However, any M3 of a similar size should fit fine. You should also be able to use smaller length M3 bolts with varying thread lengths if needed. However, the 30mm length is the size to allow for a perfect flush mounting with 6 bolts.