Contains a tiara with a recessed box to place a magnet which holds a large gem in the center. Large gems are printed with a recessed magnet slot which lines up with the tiara, or can be used as refrigerator magnets. The magnets are held in place inside the print and do not requre any gluing. The size of the magnet used is 3mmx8mm such as these: https://www.amazon.com/Magnets-Neodymium-Refrigerator-Building-Kitchen/dp/B09TQQHQLP/ref=sr_1_3?keywords=8mm+x+3mm+magnets&qid=1701798353&sr=8-3

Printing Directions:

• Each plate should be printed individually to your color preference
• When printing the gems, there is a pause to where the magnet should be placed horizontally into the gems, make sure that you put them all in the same way so that they will be interchangeable with the tiara.
• When printing the tiara, there is a pause to where the magnet should be placed vertically to hold the gem in place. (I like to print the gems first and use one to make sure that the magnet faces the correct way.)