Divider for 140x200mm Basket by Eternity Labs
Print Profile(1)
Description
Divider for the 140x200mm Stacking Storage Basket by Eternity Labs
If you have printed the 140x200mm Stacking Storage Basket by Eternity Labs, you might find that a divider would be helpful. The basket is a great design (which is available in different sizes also), and I've printed a few. I just found that I'd like to have a divider in them, so I created a divider for this basket following the original design with hexagon pattern.
The divider indexes into two holes on each side so it can be positioned where ever you need it to be. You can also use more than one divider in a basket. Baskets can still stack with divider(s) in place.
The 140x200mm Stacking Storage Basket by Eternity Labs can be found here: https://makerworld.com/en/models/520956#profileId-473125
NOTE: As of January 10, 2026 this only works on the first print profile from Eternity Labs, it will not fit the second one because the hex pattern is slightly different (the basket is a different 3d model, not just different print settings).
I also have a divider for the 92x132 basket here: https://makerworld.com/en/models/836771#profileId-782230
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (55)