1/80 Assembled Strike Gundam
Print Profile(3)
Description
The filament I used for printing is Bambu's PLA. Hole compensation should be adjusted based on the filament used. Glue is required for assembly, and a 0.1mm layer height is recommended for printing the head.
The material I use when printing is the PLA of Bambu. The hole compensation needs to be adjusted according to the different materials used, and glue is needed for installation, and it is recommended to use 0.1 layer height for printing on the head part.
2024-07-04
Revised print parameters to include the previously omitted feet.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)