Search models, users, collections, and posts
Atomos Shinobi / Ninja V Sun Hood
IP Report
Print Profile(1)
0.16mm layer, 3 walls, 15% infill
Designer
2.6 h
2 plates
Open in Bambu Studio
Boost
30
64
11
8
122
79
Released
Description
This is a model of a sun hood that I made for the Atomos Shinobi, which I believe is the same as the ninja V. I ended up using the straight version but I have included both straight and angled just incase. I tried to keep enough clearance for the 1/4 -20 points, seems to work fine for my setups. Adaptations allowed, so long as they are shared and available for others to use. I have included both the STL and STEP files for easy modifications. The angled version I had some bad prints with, but i believe it was due to either bad settings or wet filament as at the time this was printed with PETG and I was pretty new.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (11)