THE BEST Wankel Engine (Rotary) By RGMod

This is the best wankel engine of the whole internet !!

You will not find a better one, guaranteed !!

From the old model, i made it bigger and better (added bearings, strengthened the engine block, the engine cover and the shaft, the spinning triangle is now better fitted and the engine is now more air-tight in general).

It has some torque, and it gets scary fast at 50psi (haven't tried more myself, i'm afraid it will explode on me).

It also has a decent rotary sound, for those who like that (like me).

After printing, you may need to slighly trim the edges of the triangle so it will fit much better.

Also, to improve efficiency, this engine is 95% air-tight, which is incredible (this means it is very efficient to transform compressed air into power).

If you like my model, don't forget to leave a like a consider a boost !

Materials required :

• 4x or 6x m3x10 screws
• [Optional] 4x or 6x m3 washers (you don't have to put washers but i recommend it)
• 2x [8x16x5]mm bearings (8mm ID, 16mm OD, 5mm W)
• [Optional] 5x m6 bolt for weight on flywheel, but it runs very good without it too