NVIDIA Tesla P4 Shroud Replacement - Noctua 60mm - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

user_3338307041

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 15% infill

Designer

1.4 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Description

A custom shroud for the NVIDIA Tesla P4 graphics card. It is based on the “Tesla P4 airflow guide replacement” and adds two 60mm fan mounts, as well as sunk-screws and a lower shroud height (1mm).

It is specifically build for two Noctua NF-A6x25 fans and increases the thickness to slightly more than 2 slots. This is fine in cases like the Jonsbo N3 where no fresh-air intake is present and other solutions are not feasible with the given space.

It should be printed at 0.12mm layer height (due to really low height) and supports enabled (otherwise its pretty hard to put the vibration dampeners in). PLA should be fine, but something more heat-resistent is recommended. Additionally it is recommended to use the Noctua vibration dampeners instead of the fan screws to mount the fans onto the shroud.