A1 Y Axis Cover Tension Bar( Warped Cover Fix )
Print Profile(1)
Description
This is a fix to Bambu A1's Y axis cover drooping. This Fully 3d printed model works on the idea of tensioning the cover from the back side and bending the cover back the other way towards the bed so it clears the screws and fixes the drooping. This is done by installing this tension bar on the hexagon's on the backside of the cover. I recommend you dry test, before gluing the tension bar in. Getting it close to the middle(refer to images) worked best for me but your usage my vary.
Try to print in highest temp filament you can. I used ABS for the profiles but PETG or ASA I believe would work fine.
Plate 1 is what worked for me its slight bends the cover towards the bed about a 1mm
Plate 2 is .5mm longer and keeps the cover more straight
This is my First Design and Post on Maker worlds Please let me know if you have any issues with my model! Thanks again!
If you like the model a boost would be appreciated!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)