Buffalo Bills Josh Allen Madden 24 Deluxe Edition

Let's go Buffalo!!
 

This is a long print, but worth the time for an awesome end result. I've scaled this file to 125% to maximize the size on my X1C. If you need to re-size, be careful to uncheck “uniform scale” and ONLY change the X and Y axis. Do not resize the Z axis, or it will mess up the colors.

If this is your first Hueforge print, be aware that the image will look a little off in Bambu Slicer, because the slicer can't compensate for the blending of colors. It will print correctly, if you haven't resized the Z axis.

Instructions:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm **this requires a .2 nozzle

STL is 200x151.13mm – this profile is scaled up to 250x189mm

Filaments Used:

PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
 

Can be printed with or without AMS. Without AMS, you can do manual color swaps, as each layer is a single color.

Swap Instructions:

Start with Jade White
At layer #9 (0.48mm) swap to Blue
At layer #18 (0.84mm) swap to Dark Blue
At layer #21 (0.96mm) swap to Black
At layer #32 (1.4mm) swap to Jade White
At layer #33 (1.44mm) swap to Red
At layer #42 (1.8mm) swap to Mandarin Orange
At layer #46 (1.96mm) swap to Beige
At layer #66 (2.76mm) swap to Jade White for the rest.