3DPrintBunny

cover

1.png

plate_1.png

plate_2.png

2024-11-20_07a1a5ee4ba83.png

Profile for the chimney and platforms

CHIMNEY 0.28mm layer, 2 walls, 8% infill

1z.png

SANTA 0.2mm layer, 2 walls, 15% infill

Screenshot 2025-10-26 093417.jpg

A profile for a set of reversed number platforms.&nbsp;These numbers are stacked from 24 down to 1 and create a countdown to Christmas rather than the traditional Advent Calendar.

Countdown to Christmas number platforms

Cryptk

PXL_20241225_024430579.jpg

PXL_20241224_210427004.jpg

This is an additional profile for the SANTA that has fewer filament changes, thus saving a lot of time and filament waste.  I merged all of the pieces together and re-painted the model so that it will completely match the original version.  This has removed things like having pink only on interior layers or the hat having red on the interior when the exterior layers are completely white, thus adding more filament changes to layers where you can&#39;t even see that color.&nbsp;In total this profile results in the following improvements:<ul><li>filament changes are reduced from 166 to 138</li><li>the print time is reduced from 6h12m to 5h17m on an X1 Carbon (15% faster)</li><li>flushed filament volume is reduced from 91.52g to 77.11g (an almost 16% reduction in waste)</li></ul>Almost a full hour faster, with less waste and with no visible changes to the model.&nbsp;Additionally, this has some extra benefits such as the black for the eyes extending further back into the head resulting in more contact area with the surrounding filaments making it less likely that Santa&#39;s eyes will pop off if children are a bit rough with him (Santa needs his eyes to deliver those presents after all!)

SANTA fewer color changes - 0.2mm layer, 2 walls, 15% infill

johnsrestoandfab

462541261_541235445380119_2777847557476120008_n.jpg

465417006_1098716868313554_2744598726993054204_n.jpg

462551124_1696015281180233_5144129717241670230_n.jpg

I love the Santa calendar, however Santa likes to walk out the front and fall on his face. I designed the base with a recessed area the chimney sits in to be glued in place. its tilted back 2 degrees to help keep Santa in the chimney

Santa calendar base with 2-degree tilt back

Pureshem

Snug fit.jpg

The platforms slide out very easily. &nbsp;I added a small additional ledge next to the numbers to be a snugger fit, yet easy to remove. &nbsp;Uses x-y compensation to get it just right. &nbsp;Suggest that you print one and adjust per your printer for best fit. &nbsp;Because x-y compensation is used, the color change must be made in the print preview at the layer the numbers start.

Snug fit, x-y compensation, color change @ preview

finnwii3d

Screenshot 2024-12-09 232032.png

20241209_200507.jpg

20241209_195817.jpg

20241209_195824.jpg

20241209_195832.jpg

20241209_200628.jpg

Added a storage to the baseto store the day slats. Uses 8 x 2.5mm Magnets. Glue the fireplace to the base when completed. May have to glue the magnets in place. Take care to have the magnets the right polarity for the lid to place flat.&nbsp;

0.28mm layer, 2 walls, 25% infill

plate_3.png

plate_4.png

Neededwill

IMG_7463.jpg

This is sized for the A1 Mini with the base added from another creator on this item.&nbsp;

0.28mm layer, 2 walls, 8% infill

count up

JohnyDang

IMG_0140.JPG

0.2mm layer, 2 walls, 5% Gyroid infill

Pyrokidd89

Screenshot 2025-12-09 113041.png

1000005292.jpeg

Print the Fire separate then I added a pause to the chimney are layer 7. you push the fire into place (make sure its all the way down) then resume the print. This lets you have 4 colors for the fire and 4 for the chimney.

Tchetmaker3d

IMG_20251209_214551.jpg

IMG_20251209_214638.jpg

J&#39;ai créé une boite de rangement pour les lamelles avec un couvercle coulissant.Elle fait 113 x 76 x 78H

I created a storage box for slats with a sliding lid.It measures 113 x 76 x 78H

Slat storage box

The Grinch

Ducky

PXL_20251221_182156201.jpg

Screenshot 2025-12-21 132136.png

Grinch in the same style as the original Santa

The Grinch - 0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Help Santa down the chimney and into the fireplace.A fun advent calendar that prints without supports.&nbsp;I have attached two print profiles one for the chimney and the other for Santa.&nbsp;See it in action here: youtube.com/shorts/r2498gwhQWo?si=Jl0W0ECA70JTyl3x&nbsp;** Update I have added the number platforms reversed for anybody who would like a countdown to Christmas starting at 24.

Santa Advent Calendar

ASIA

Print Profile(12)

Description

Comment & Rating (1459)

License

Related Models