Dedication 2 Lil Wayne Cover Hueforge
Print Profile(1)
Description
Boost Me (for free)
Here is a Hueforge cover I made of Lil Wayne's Dedication 2 mixtape. For any Hip-Hop or Lil Wayne fans this would make a great addition to any collection y'all may have.
The Model is 200x200mm in size. I printed this on the P1S so should work fine on the A1/X1C.
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm. Make sure infill is set to 100%
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.1
PLA BambuLab Matte Scarlet Red Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
If print does not have layers set here are the settings.
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Scarlet Red
At layer #15 (1.28mm) swap to Black
At layer #17 (1.44mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)