Battery holder for ABB M5010
Print Profile(1)
Bill of Materials
Description
I got a measuring device “ABB Metrawatt M5010”. but as i used it the batterie holder broke down twice. i tried to fix the original one with mixed results. it was working, but everytime i needed to replace the batteries the holder broke in an other place :(.
So i designed my own since i dont get a new holder anymore.
the tricky part is, the compartment for the 6 AA cells is so tiny, it fits the 6 cells and some few mm around for the holder.
whats why i decided to use the BB PAHT-CF filament. Yes you can try to use an other filament, but be warned: it will break like the original holder.
You also need batteriekontacts. I used copper strips (0,8mm) and soldered springs onto the copper strips.
you could use those contacts https://www.mouser.de/ProductDetail/Keystone-Electronics/290?qs=jLI%2FJnmL0oB9dhso97v6ug%3D%3D
but the need some trimming.
For the two output contacts i used some leftover brass and my lathe.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)