Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x138.45mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Lemon Yellow
At layer #19 (1.6mm) swap to Ivory White for the rest.
🔥 Explore My Collections! 🔥
Boost Me (for free)
If you enjoy my creations and want to support my work, please boost me! Your boosts help me keep creating and sharing free models like this one. Thank you for your support!
License
Comment & Rating (1)