Search models, users, collections, and posts
Espresso Machine Steam Wand Grip
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.1 h
1 plate
Open in Bambu Studio
Boost
3
5
0
0
12
7
Released
Description
Single Color Steam Wand Grip (made for Iberital IB7) needs to be printed with TPU for heat resistance.
- As I only have A1/A1 mini, if you have P or X series, you can print with ASA I think, however make sure you made the hole larger as this is optimized for TPU
- The original one broke after single use! (It's close to the original part, however designed from scratch with FreeCAD, slightly larger and has more curves.)
- The hole is smaller than original as TPU flexes more than the original part (probably original part was made from ABS/ASA.)
- Drying your TPU is highly recommend, otherwise your model may have lots of stringing around the hole.
I used:
Color #1: eSun TPU 95A
with 0.4mm nozzle.
I used Textured PEI Sheet as it is TPU!
For all espresso coffee machine fans out there, enjoy!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)