Mostly impressed by the supports, delicate removal but they definitely did the job. eSun PETG. felt it needed a bit of a sand, landed on the weathered look

3Dprinted

0.2mm layer, 2 walls, 15% infill

WoodquarterLabs

Abbe

A1 Mini - Realisitc size (34cm) - 3 parts + connectors

what did you use to put it together? did you just snap it? or a certain glue? looks great btw!

Brandon Grassmuck

Hey, I designed this print profile with 3 connectors, but you definitely need some glue to keep it in place. the connectors mainly help to align the parts together for glueing.

svenson

yea, like mentioned I used a few drops of super glue! very easy to put together 

printed very quickly and looks great. I just need to clean the supports up and do some buffing. Great print!
Bambu Labs A1
Inland pla white from Microcenter.com

Mackled0g

Wand_Miriam 20 cm 

goodboy

thanks for sharing the details of the changes you made!! 

mj0808

Great design and print.  Used Bambu Matte Latte Brown at 0.16mm Optimal, 3 walls, 15% grid infill.  Scaled 180%, total length 12" fits on A1 plate.  Tree supports were easily removed.  Tip of wand separated from plate and curled slightly but was easily straightened with a heat gun.  I would add a brim around the tip next time.  (Pictured on Harry Potter Wand Holder Wall Mounted Display 5 Wands by deadplanet_design on Thingiverse)

user_460170

Leontinker

digisonic

hat super geklappt danke und gerne wieder

That worked perfectly, thank you, and gladly again

A1mini

Lucas

I really like this wand but the geometry is a bit too polygon-like. I would appreciate more details!

BODY MECHANIC

cover

Captura de pantalla 2024-01-09 193918_4a413fbc-2764-40d0-8009-acdde6d7ff12.png

Captura de pantalla 2024-01-09 193904_13a89ef0-18fa-44f2-bcdb-04c7be6f195e.png

Captura de pantalla 2024-01-09 194320_cf4da203-dca4-4a79-a9cb-18deeb994fe5.webp

plate_1.png

Captura de pantalla 2024-01-09 193918_4a413fbc-2764-40d0-8009-acdde6d7ff12.webp

Captura de pantalla 2024-01-09 193904_a1a98864-61d2-4450-9dbf-634e3ddb9e25.webp

16 cm Wand_Miriam

IMG20240113122349_a78dd669-8da6-426c-bb96-2f20bbe12197.webp

plate_1.webp

granchio87

PXL_20240704_122149915.MP.jpg

PXL_20240704_122953226.MP.jpg

PXL_20240704_112838855.MP.jpg

Miriam Wand_34mm_Print Plate.JPG

2024-07-04_c55e73832eed2

I really like this model, but I wanted one in a realistic size printed on my A1 Mini. So, I decided to create a new print profile for it.&nbsp;By printing the parts upright, the print is, in my opinion, cleaner than the horizontal model, where much support has to be removed.&nbsp;I recommend using a bed adhesive to improve adhesion—at least, I used a glue stick during my test prints.&nbsp;Printed with:<ul><li>0.2mm layer, 2 walls, 15% infill</li><li>Minimal support on one part and brims</li><li>Random seam placement</li><li>Loose connectors, so glue is needed. If you need a tighter or more loose fit, try to adjust the connectors by yourself.</li></ul>

Print Profile(4)

Description

Comment & Rating (296)

License

Related Models

Big Brick * Harry Potter *500%

Harry Potter Dementor Book Nook

Big Brick * Harry Potter - Quidditch * 500%

Harry Potter Carillon

harry potter wand (miriam)