Print Profile(2)
Description
voronoi sphere
minimalist decorative voronoi sphere in two sizes
pieces dimensions in mm:
- standard ~ 70mm diameter
- mini ~ 50mm diameter
you will need to clean the brim (easier to do with a small deburring tool), and you may run into some stringing due to the geometry, especially if the filament isn't fully dry · this clears aways easily with a couple of passes with a heat gun
the profile has fuzzy skin enabled to give a textured look, which also makes it consistent as there are some overhangs
photos show printed in different matte and marble plas
- .40mm nozzle
- .16 layer height
- 10% cross hatch infill
- fuzzy skin on all walls (0.2 / 0.2)
notes
- includes bambu studio 3mf files and STLs (70 and 50 mm)
- all photos uploaded are of the actual printed model, and are copyright protected
- if you enjoy this model please consider to buy me a coffee
- commercial licence membership available on my patreon
Boost Me (for free)
if you enjoy the design, please consider giving it a boost :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (98)