only for A1 mini! - 0.16mm layer, 3 walls, 100% infill
Designer
5.2 h
2 plates
4.6(27)
Less Filament - 0.2mm layer, 3 walls, 15% infill
2.9 h
2 plates
4.7(22)
0.2mm layer, 3 walls, 100% infill
3 h
2 plates
4.4(10)
Click to see more
Open in Bambu Studio
Boost
1986
5084
327
168
4.8 k
3 k
Released
Description
Boost Me (for free)
If you like my design, a boost would help me a lot
⚠️ Please!! for your safety, use only the designer print profile (first in the list). It is tested with the latest version and free of errors. Don't risk your print...and your machine!
Comb for perfect gradients, fading, blending. With a logarithmic gradient hair comb it goes from 2mm to 22mm, and with a more ergonomic and comfortable handle
Update! Try the hair texturizer now for after a haircut, for super fashionable results
17-11-24: Redesigned model and profile for greater resistance in the upper beam part, eliminated chamfer for less complexity, added more thickness at the bottom for more rigidity and strength. Now the piece is stronger and more resistant!!
😇 The profile has been tested on a X1 carbon with a bambulab PLA filament with exceptional results. If the quality of your print is not adequate, it is not a problem with my profile, but rather with your filament or your printer. Please use a quality PLA filament (preferably new) that is in good condition and free of moisture. Correctly calibrate the flow to obtain good results. The part has thin walls that require a well-calibrated printer.
Here you can see a test of its resistance and hardness
If you get bad results or weak prints, please let me know in comments before voting below 4 stars, and I will help you improve the print. Good ratings help me upload more models and keep my spirits high.
Used it for my own haircut — had no issues with durability on Elegoo PLA+. Due to how the layer lines are, the clipper kind of bumps into the “steps” at the bottom of the comb (but you can pass over it).
For a self haircut, you will need both combs and definitely a mirror for the back. The haircut took a lot longer than what I’d usually do due to having to pause, reposition the comb, resume. These combs are not putting professional barbers out of business but for a self haircut, it’s not bad!
works decent. for someone who never cuts hair, and used it on my son for the first time, it seemed to fade okay. had to print twice to get a perfect print. Don’t hate on my cut :) again my first time ever and my son liked it! before and after pics. his hairs a little long on the top so it doesn’t show the fade that well in the photos
Hi honestly that was a coincidence because I ran out of filament twice or rather I printed with remnants You can simply create a filament change in Bambu Studio at the height of your choice for it to be like mine the change must happen twice Alternatively you could also pause the process on the printer during printing and change the filament again twice accordingly Good luck
Have you seen the photos of some of the profiles? It looks like they were printed with a 3D pen. That's why I'm putting up the warning, who knows what that profile will look like.... 😜
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
https://makerworld.com/models/2002935-texturizing-hair-comb#profileId-2156810
Comment & Rating (327)