Fading - Blending comb - Free 3D Print Model

Search models, users, collections, and posts

sagat

Tools>Hand Tools

IP Report

GIF

Print Profile(2)

All

X1 Carbon

P1S

H2D Pro

A1 mini

P1P

H2S

H2D

X1E

P2S

H2C

X2D

A2L

NO supports - 0.2mm layer, 3 walls, 100% infill

Designer

2.1 h

2 plates

4.8(672)

0.2mm layer, 3 walls, 100% infill

Designer

2.4 h

2 plates

4.7(202)

Open in Bambu Studio

Boost

6566

16903

1073

394

16.3 k

12 k

Released

Description

Boost Me (for free)

If you like my design, a boost would help me a lot

Comb for perfect gradients, fading, blending.
Flexible model that adapts to the head perfectly, ergonomic finish, quick impression.

I am not a professional hairdresser, in the photos of the model you can see a haircut that I gave my son, he is always delighted and fashionable!

Update! Try the hair texturizer now for after a haircut, for super fashionable results

https://makerworld.com/models/2002935-texturizing-hair-comb#profileId-2156810

Added another model with a more logarithmic curvature (not linear), from 2 to 22mm, try it if you want to combine your collection!!
https://makerworld.com/en/models/754266#profileId-688295

*equivalent business model:

You have a comb that if you buy it on Amazon can cost you up to $20

https://www.amazon.com/blending-combs-fades/s?k=blending+combs+for+fades

Comment & Rating (1073)

@user_2698204987

Print Profile

NO supports - 0.2mm layer, 3 walls, 100% infill

Great design. I used both the left and right handed comb when I cut my hair. The only problem I had was trying to cut the back of my hair by myself with the comb. The fade looks good on the parts that I was able to see and use the comb. Nice design and worked well.

The profile uploader has replied

@sagatxxx

🫶

@ceros

Boosted

Print Profile

0.2mm layer, 3 walls, 100% infill

First time using it. Turned out great and will be better next time with experience.

The profile uploader has replied

@sagatxxx

looks great 😃, thanks for sharing

@PeytoBismol

you’re cooked

(Edited)

@3dguy9

Replying to @PeytoBismol :

fair

@user_2585948094

Print Profile

0.2mm layer, 3 walls, 100% infill

Decent print, however the handle design is quite thin. If you zoom in on some of the print images you will see the images are out of focus’s hiding some of the texture in the handle and on the brush. you can see it in other images.

The profile uploader has replied

@sagatxxx

If when printing the result is not like my photos, it is a problem with your filament or your machine, because the model is fine and the profile is the same.

@sagatxxx

hi Lucas! In your photos I see that you have to calibrate the filament, I see overextrusion, that's why the upper finishes are bad and the supports stick too much, what machine do you use? Lower the flow rate to ~95 and try it out, if you want, do first a flow test to see how you progress. The handle is the necessary one, for it to work well it has to be thin and high (that's why you need supports), that way it's more comfortable to cut hair, you won't touch the head with the handle and you can rest the whole comb on the head (not just one corner, which could ruin the function of the comb and the hairstyle!), the other remixes with the thicker handle and stuck to the bed are not going to work well (that's my opinion) if you need more help don't hesitate to comment, happy printing

@user_2585948094

Replying to @sagatxxx :

hey, I am using a Bambulabs P1S. I think I may need to clean the hotend because everything has printed perfectly until this point, and it looked like it had a small piece stuck to it when this started. I didn’t modify any setting just ran it from my phone.

(Edited)

@GRFNprints

Boosted

Print Profile

0.2mm layer, 3 walls, 100% infill

a bit of stringing but printed well

The profile uploader has replied

@sagatxxx

hello! you have to calibrate your filament a little to avoid that problem. Another thing, I have uploaded a new v1.1 model where I make some adjustments to improve the hair entry in the comb, if you want to download it and print again to test and correct the stringing, thanks for comments

(Edited)

@Radiationzone

Also the stringing is probably because the filament isn't dry.

(Edited)

@SqiLLoWs

Print Profile

NO supports - 0.2mm layer, 3 walls, 100% infill

really cool thing but I'm not entirely convinced of the function yet😅

Show original

@BRZ1337

Boosted

Print Profile

NO supports - 0.2mm layer, 3 walls, 100% infill

What a perfect design! Thank you very much! I used PETG and it's working great!

@user_464723963

we are the same, I am printing it to cut it hahahahaha

(Edited)

Show original

@Aaron_Kirkby

Print Profile

NO supports - 0.2mm layer, 3 walls, 100% infill

It printed nice and fast. And it also worked. I love how my haircut turned out.

@technotim

Boosted

Print Profile

NO supports - 0.2mm layer, 3 walls, 100% infill

Great!

The profile uploader has replied

@sagatxxx

looks great, thanks for sharing

@AvioDesign

Print Profile

0.2mm layer, 3 walls, 100% infill

Very useful thanks

The profile uploader has replied

@sagatxxx

♥️

@srcnucar

Print Profile

0.2mm layer, 3 walls, 100% infill

I’m looking for this item on internet, luckily found here. Thanx for good design.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.