On the Tower Vision Card from FFBE: WotV

Delve into the captivating art of 3D printing with the stunning "On the Tower Vision Card" from FFBE: War of the Visions. This 3D model emanates nostalgia and serenity, encapsulating Final Fantasy VII's character, Tifa, waiting for Cloud on the Water Tower.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 132.68x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 1.7
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Blue Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #16 (0.76mm) swap to Brown
At layer #22 (1mm) swap to Marine Blue
At layer #32 (1.4mm) swap to Jade White
At layer #37 (1.6mm) swap to Blue
At layer #41 (1.76mm) swap to Jade White for the rest.