Gridfinity Generic Caliper + Battery Holder 6x2x6

Gridfinity Bin to hold Generic 6-inch/150mm calipers and 2 SR44 batteries for easy access. Should also fit 6-inch Mitutoyo AOS (but I don't have any to test) The model is 45.5mm tall (~1.75"). If you need them higher in your drawer print an empty bin as a shim for underneath.

Designed to be printed multi-colour with an AMS, but you could choose the same colour and print without an AMS or colour changing.

This will fit generic calipers which are less than 79 mm tip to tip.

Tip: If you aren't sure if yours will fit use the second plate with the partial model to see if yours fit before doing the full print.

If you are looking for a 4-inch/100mm caliper holder, try this one.

You can also take a look at my other models here.

Thanks to Leo Michine for the Gridfinity Generator

You can take a look at my other models here.