Bambu Lab A1 Mini: Printer Stand with Print Plate Organizer by JAV-3D

JAV-3D

3D Printer>3D Printer Accessories

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 30% infill

Designer

14 h

2 plates

4.8(14)

0.4mm Nozzle, 0.24mm layer, 2 walls, 30% infill

Designer

13.8 h

1 plate

4.9(8)

0.16mm layer, 3 walls, 5% infill

Designer

10.9 h

2 plates

4.5(6)

0.6mm nozzle, 0.3mm layer, 2 walls, 30% infill

Designer

14.3 h

1 plate

Click to see more

Boost

150

270

534

178

Released

Description

English

Description:

Enhance the print space utilization of your Bambu Lab A1 Mini printer with our 3D print. This file allows you to slide and organize up to 5 additional print plates under the printer. The print consists of two halves that need to be glued together after printing. To prevent any slipping during operation, we recommend attaching non-slip feet under the printer stand.

Features:

Efficient Print Space Utilization:

Create space on your work area by neatly storing up to 5 additional print plates under the Bambu Lab A1 Mini printer.

Two Halves for Gluing:

The printer stand is composed of two printed halves that form a sturdy unit when carefully glued together after printing.

Non-Slip Feet:

To avoid slipping during operation, non-slip feet can be attached under the printer stand.

Application:

Printing and Gluing:

Print the two halves of the printer stand and carefully glue them together after printing.

Inserting the Print Plates:

Slide up to 5 print plates under the organized printer stand.

Attaching Non-Slip Feet:

Attach non-slip feet under the printer stand to ensure stable support.

Note:

The 3D print file allows customization for individual needs, including the use of non-slip feet for additional stability.

Anti Slip Silicon Pads for Shoes.

Deutsch

Beschreibung:

Optimieren Sie die Druckplatznutzung Ihres Bambu Lab A1 Mini Druckers mit unserem 3D-Druck. Diese Datei ermöglicht es, bis zu 5 zusätzliche Druckplatten unter dem Drucker einzuschieben und zu organisieren. Der Druck besteht aus zwei Hälften, die nach dem Druck zusammengeklebt werden müssen. Um ein Verrutschen während des Druckbetriebs zu vermeiden, empfehlen wir, rutschfeste Füße unter die Druckererhöhung zu kleben.

Merkmale:

Effiziente Druckplatznutzung:

Schaffen Sie Platz auf Ihrem Arbeitsbereich, indem Sie bis zu 5 zusätzliche Druckplatten organisiert unter dem Bambu Lab A1 Mini Drucker verstauen.

Zwei Hälften zum Zusammenkleben:

Die Druckererhöhung besteht aus zwei gedruckten Hälften, die nach dem Druck zu einer stabilen Einheit zusammengefügt werden.

Rutschfeste Füße:

Um ein Verrutschen während des Druckbetriebs zu verhindern, können rutschfeste Füße unter die Druckererhöhung angebracht werden.

Anwendung:

Drucken und Zusammenkleben:

Drucken Sie die beiden Hälften der Druckererhöhung und kleben Sie sie nach dem Druck sorgfältig zusammen.

Einschieben der Druckplatten:

Schieben Sie bis zu 5 Druckplatten unter die organisierte Druckererhöhung.

Anbringen rutschfester Füße:

Kleben Sie rutschfeste Füße unter die Druckererhöhung, um stabilen Halt zu gewährleisten.

Hinweis:

Die 3D-Druckdatei ermöglicht Anpassungen an individuelle Bedürfnisse und die Verwendung von rutschfesten Füßen für zusätzliche Stabilität.

Optimieren Sie Ihren Arbeitsbereich mit diesem praktischen 3D-Druck, der nicht nur Platz schafft, sondern auch eine geordnete Aufbewahrung von zusätzlichen Druckplatten ermöglicht.

Extra

Upgrade your Bambu Lab A1 Mini Printer Stand with our 3D-printed additional drawer. This extension adds an extra drawer to the stand, providing enhanced storage capabilities. Even with the added drawer, you can still conveniently insert 2-4 build plates.

https://makerworld.com/en/models/76627#profileId-81170

Comment & Rating (43)

@BartucSP

Print Profile

0.16mm layer, 3 walls, 5% infill

Nice design should be a 5 but I'm giving a 3 just as a warning for other users. Really precise fit but pretty much impossible to do a valid print with an a1 mini. Both pieces are too large and tall, making them warp, I guess an enclosed printer is needed. I was hoping that even with the warp the pieces will work, but due to the precise fit, nope, it didn't. Looks like I wasted almost a kg of filament. I'm attaching a photo of the pei plate being lifted up by the warping.

(Edited)

The designer has replied

@JAV3D

Sorry to hear that. I printed 2 of them and I have had no problems. Printed with Kingroon PLA from Aliexpress. Both on the A1 mini without enclosure.

(Edited)

@BartucSP

Replying to @JAV3D :

I printed it with a little of Jayo grey PLA + and bambu white basic PLA... In any case, based on your photo with the silicon pad already apllied, looks like you've got warping too. Maybe the difference and why it worked for you is that you printed at least one of the pieces in the other way round that is in the uploaded project (based on the low infill one). In your photo the warped area is the interior one (where you glue both parts) in my case is the exterior. I finally make it work sanding carefully with a rotatory tool for about an hour/hour an a half, all front/back and corner borders. That's why I guess your prints worked, cause you dont' have any defects in the exteriors due to warping but in the inside. You're not lossing dimensional accuracy but have a lite gap in the sides of the middle, I don't have any gap in the middle but I lost dimensional accuracy due to warped exteriors.

(Edited)

@Freer

Boosted

Replying to @BartucSP :

I find it a bit unfair that you gave him 3 stars. There is nothing the designer can design to prevent warping(if there is please let me know because I myself am a designer also). Large parts may warp, but the most likely culprits when printing high mass objects, and things to check are; to make sure that the raising column of heated air from the build plate is not disturbed by an air vent, high traffic areas, windows, or door opening/closing, make sure the room is as close to 20-40c as possible, also if that all fails try a different brand filament. Most people are partial to their favorite brands, but all filament has the problem of "it may be awesome at some attributes, and crappy at others".

(Edited)

@KlemK

Print Profile

0.16mm layer, 3 walls, 5% infill

Great design and easy print. Every printer needs storage.

The designer has replied

@JAV3D

looks like mine. great

(Edited)

@Freer

Boosted

Print Profile

0.4mm Nozzle, 0.24mm layer, 2 walls, 30% infill

Amazing print, thank you!

@I3d4Prints

Print Profile

0.16mm layer, 2 walls, 30% infill

Printed this half perfect 👌. Small bit of post print prep work on the bed side of print at the rounded edges. It was just a pinch to sharp for me. But, Im super picky about dumb things like that. Especially when the rest of the print is smooth and perfect. Great so far.

@KWhale52

这模型是真不错，准备打印一个，请问用起来的话，稳定性怎么样，运动或者狂暴模式打印会有晃动不

The designer has replied

@JAV3D

"我在底部粘贴了硅胶脚。现在甚至比没有支架时更加稳定。"

@KWhale52

Replying to @JAV3D :

这就去打印哈哈哈哈

@JAV3D

Replying to @KWhale52 :

请随后给我看完成的打印文件。

@howtohomemade

Hi, where can I find the yellow hotend organizer?

The designer has replied

@JAV3D

Look in my uploads or https://makerworld.com/en/models/49140#profileId-51064

(Edited)

@olske

Print Profile

0.16mm layer, 3 walls, 5% infill

nice design, came out great

@TheForg3d

Boosted

Fantastic work! It works great with the a1 Mini and additional draw. We had a issue with the nozzle attachment and found the nozzle pod fitted slightly better once it was slightly shorter :)