Ondřej

cover

20241023_224104.jpg

20241023_224621.jpg

20241023_224630.jpg

1. Top Left and Bottom Right

plate_1.png

2. Top and Bottom Edges

plate_2.png

3. Top Right and Bottom Left

plate_3.png

4. Left and Right Edges

plate_4.png

Middle

plate_5.png

Bottom Left - Top Right 7x9

plate_6.png

Top Left - Bottom Right 7x9

plate_7.png

plate_8.png

2024-10-26_f4a9f4aa9ca65.jpg

0.25mm layer, 3 walls, 0% infill

cmcraig2

IMG_0012.jpg

IMG_1415.jpg

UPDATE 8-30-25 - Added two lower panel clips (see photo).  Install these before attaching panel to upper hanger parts.  Read the installation description in the print profile added for these two clips if it isn&#39;t obvious how they install.&nbsp;I deleted the unused parts and added the exact amount of connectors needed for a complete installation.

All parts needed in this print profile

Top Left and Bottom Right

Top Right and Bottom Left 5 x 9

Aaecht

IMG_5548.png

<ul><li>Slightly narrower so the panel doesn&#39;t stick out</li><li>Further removed unnecessary plates to avoid confusion (if you want a different look, simply rotate them as desired)  </li></ul>

Neat Fit 12x9 and 5x9 with connectors

IMG_1416.jpg

I wanted the bottom of the HSW panel to be secured to my P1S so I designed these clips.  To install, run your finger along the underside of the frame and locate two areas that do not have any molded webbing so the hook on these clips can fit into.  Press the hooks into place, then temporarily unclip the panel from the top hanger parts, tilt the panel away at the top to engage the hooks into the underside molding of your printer side panel, then press the panel back onto the top hanger parts.&nbsp;These are totally worth printing.  The HSW panel isn&#39;t floppy at the bottom anymore.

Lower panel clips

KYZ Design

Framed HSW - 5 Sets - Honeycomb Storage Wall

Framed HSW - Various Sizes - Honeycomb Storage Wall

I modified the 12x9 model to 7x9 to cover exactly the whole side of the P1S.&nbsp;I used these <a target="_blank" href="https://makerworld.com/en/models/133125#profileId-144364" rel="nofollow noopener">connectors</a> to connect the parts.&nbsp;Try looking at the <a target="_blank" href="https://makerworld.com/en/models/690120#profileId-618903" rel="nofollow noopener">purge line bin</a> accessories I created.

Framed HSW 12x9 and 7x9 (P1S side full coverage)

GuyWithAPrinter

photo_2025-06-25_00-00-00.jpg

HSW Bottom Bracket (for P1S side full coverage)

ASIA

Print Profile(4)

Description

Comment & Rating (84)

This remix is based on

License

Remixes (1)

Related Models